Electrostatic corona separator SE-24/150-1

Electrostatic corona separator SE-24/150-1

   These separators are designed to separate mixtures of granular materials the components of which are different in electrical conductivity or particle size, such as rare and non-ferrous metal ores, powders in powder metallurgy, molding sands, industrial mixtures, etc.



PARAMETERS VALUE
1. Number of processing units 1
2. Productivity by feedstock, m3/h (t/h at the bulk weight of the base mixture of 2.5 t/m 3) 1,2 (3,0)
3. Particle size of the feed mixture, mm, in the range of 0,04-2,0
4. Temperature of the feed mixture, ° C, max 150
5. Length of the working area of the precipitation electrode (drum), mm 1500
6. Diameter of the precipitation electrode (drum), mm 240
7. Frequency of the precipitation electrode (drum) rotation, depending on the type of the drive, rpm 160, 200, 240, 300, 360
8. Nominal capacity of the drive of the precipitation electrode (drum) of the processing unit, kW 0,75
9. Brush rotation rate, rpm 240
10. Nominal capacity of the brush drive, kW 0,75
11. Voltage on coronating electrodes, kV, within the limits 20-40
12. Nominal capacity of the high-voltage machine, kW 0,1
13. Three-phase supply voltage, 50 Hz, V 380/220
14. Installed capacity of the electricity receivers of the separator, KW 1,6
15. Power consumption of the electricity receivers of the separator, kW 1,3
16. Exterior dimensions of the separator, mm, length / width / height 2657/890/2904
17. Weight of the separator, kg  1550
18. Exterior dimensions of the control cabinet, mm, length / width / height 500/650/1000
19. Weight of the control cabinet, kg 100