Electrostatic corona separator SE-50/50
 |
| PARAMETERS |
VALUE |
|---|---|
| 1. Number of processing units | 2 |
| 2. Productivity by feedstock, m3/h (t/h at the bulk weight of the base mixture of 2.5 t/m 3) | 1,0 (2,5) |
| 3. Particle size of the feed mixture, mm, in the range of | 0,04-2,0 |
| 4. Temperature of the feed mixture, ° C, max | 150 |
| 5. Length of the working area of the precipitation electrode (drum), mm | 500 |
| 6. Diameter of the precipitation electrode (drum), mm | 500 |
| 7. Frequency of the precipitation electrode (drum) rotation, depending on the type of the drive, rpm | 0-280 |
| 8. Nominal capacity of the drive of the precipitation electrode (drum) of the processing unit, kW | 0,34 |
| 9. Brush rotation rate, rpm | 380 |
| 10. Nominal capacity of the brush drive, kW | 0,18 |
| 11. Voltage on coronating electrodes, kV, within the limits | 35 |
| 12. Nominal capacity of the high-voltage machine, kW | 0,1 |
| 13. Three-phase supply voltage, 50 Hz, V | 380/220 |
| 14. Installed capacity of the electricity receivers of the separator, KW | |
| 15. Power consumption of the electricity receivers of the separator, kW | |
| 16. Pressure of compressed air at the inlet of the collector, excess pressure, kPa (atm) |
5 (0,05) |
| 17. Compressed air consumption, m3/s (m3/h) |
0,05 (180) |
| 18. Power consumed by the air blower, kW | 0,5 |
| 19. Exterior dimensions of the separator, mm, length / width / height | 1080/2390 |
| 20. Weight of the separator, kg | 950 |
| 21. Exterior dimensions of the control cabinet, mm, length / width / height | 500/650/1000 |
| 22. Weight of the control cabinet, kg | 100 |