| 1. Number of processing units |
8 |
| 2. Productivity by feedstock, m3/h (t/h at the bulk weight of the base mixture of 2.5 t/m 3) |
5,8 (14,5) |
| 3. Particle size of the feed mixture, mm, in the range of |
0,04-2,0 |
| 4. Temperature of the feed mixture, ° C, max |
150 |
| 5. Length of the working area of the precipitation electrode (drum), mm |
700 |
| 6. Diameter of the precipitation electrode (drum), mm |
1400 |
| 7. Frequency of the precipitation electrode (drum) rotation, depending on the type of the drive, rpm |
0-60 |
| 8. Nominal capacity of the drive of the precipitation electrode (drum) of the processing unit, kW |
|
| 9. Brush rotation rate, rpm |
380 |
| 10. Nominal capacity of the brush drive, kW |
0,18 |
| 11. Voltage on coronating electrodes, kV, within the limits |
35 |
| 12. Nominal capacity of the high-voltage machine, kW |
|
| 13. Three-phase supply voltage, 50 Hz, V |
380/220 |
| 14. Installed capacity of the electricity receivers of the separator, KW |
|
| 15. Power consumption of the electricity receivers of the separator, kW |
|
| 16. Pressure of compressed air at the inlet of the collector, excess pressure, kPa (atm) |
|
| 17. Compressed air consumption, m3/s (m3/h) |
|
| 18. Power consumed by the air blower, kW |
|
| 19. Exterior dimensions of the separator, mm, length / width / height |
1800/2700 |
| 20. Weight of the separator, kg |
2500 |
| 21. Exterior dimensions of the control cabinet, mm, length / width / height |
500/650/1000 |
| 22. Weight of the control cabinet, kg |
100 |
