Parameters |
Value |
---|---|
1. Number of processing units | 12 |
2. Productivity by feedstock, m3/h (t/h at the bulk weight of the base mixture of 2.5 t/m 3) |
14,4 (36) |
3. Particle size of the feed mixture, mm, in the range o | 0,04-2,0 |
4. Temperature of the feed mixture, ° C, max | 150 |
5. Length of the working area of the precipitation electrode (drum), mm | 1200 |
6. Diameter of the precipitation electrode (drum), mm | 2000 |
7. Frequency of the precipitation electrode (drum) rotation, depending on the type of the drive, rpm |
0-280 |
8. Nominal capacity of the drive of the precipitation electrode (drum) of the processing unit, kW |
|
9. Brush rotation rate, rpm | 380 |
10. Nominal capacity of the brush drive, kW | 0,18 |
11. Voltage on coronating electrodes, kV, within the limit | 35 |
12. Nominal capacity of the high-voltage machine, kW | |
13. Nominal capacity of the high-voltage machine, kW | 380/220 |
14. Installed capacity of the electricity receivers of the separator, KW | |
15. Power consumption of the electricity receivers of the separator, kW | |
16. Pressure of compressed air at the inlet of the collector, excess pressure, kPa (atm) | |
17. Compressed air consumption, m3/s (m3/h) | |
18. Power consumed by the air blower, kW | |
19. Exterior dimensions of the separator, mm, length / width / height | 3000/5020 |
20. Weight of the separator, kg | 9150 |
21. Exterior dimensions of the control cabinet, mm, length / width / height | 500/650/1000 |
22. Weight of the control cabinet, kg | 100 |